愛華網你知道壁厚用英文怎么說嗎?下面來學習一下吧。
壁厚英語說法：wall thickness
壁厚英語例句：在冰水冷卻的條件下，冷卻時間與壁厚有以下的關系。
When chilled water is used to cool the mould, cycle time is related to wallthickness as follows.
ASSEL軋管機具有臺肩集中變形、碾軋段壁厚增厚等特點。
The tube deformation characteristics on ASSEL mill are deformationconcentrating at shoulder and wall thickness in rolling zone increasing.
閉模鍛造的尺寸一致性造成關鍵壁厚的完全控制，避免了鑄造工藝中鐵心移位造成的缺陷。
Dimensional uniformity of closed-die forgings results in positive control ofcritical wall thickness, eliminating deficiencies caused by shifted cores incastings.
高速離心鑄造，組織致密，無砂眼、夾渣，表面光滑、壁厚均勻。
Centrifugal casting, compact structure, free from pinhole porosity and slag, smooth surface and even wall thickness.
在冰水冷卻的條件下，冷卻時間與壁厚有以下的關系。
When chilled water is used to cool the mould, cycle time is related to wall thickness as follows.
對于給定的SCH，當管道壁厚增大或不變時，外徑隨NPS編號的增大而增大。
For a given SCH, the OD increases with increasing NPS while the wall thickness increases or stays constant.
硬態和半硬態拉制管外徑與壁厚之比不小于25者。
B.For hard and half hard drawn tubes the ratio of outer diameter to wall thickness is no more than25.
將不同壁厚的微膠囊與同一顯色劑均勻混合，涂布成片。
We mixed Microcapsules of different wall thickness and developer together, then spread the mixture over the film base.
玻璃體內冷凍冰(眼用)在冰水冷卻的條件下，冷卻時間與壁厚有以下的關系。
When chilled water is used to cool the mould, cycle time is related to wall thickness as follows.
通過研究各機架出口斷面不同點的壁厚變化，得出減徑后鋼管橫向壁厚分布不均，探討了內六方缺陷產生的原因。
It was found that the transverse wall thickness distribution is nonuniform and that is the cause of hexagonal bore formation.
口模異型化設計在優化擠出吹塑中空工業制件壁厚分布中的研究與應用
Application Research of the design of allotype die on the optimization of the wall thickness distribution of typical hollow industry parts
得出了不同含量玻纖增強PP擠出吹塑制件的最小壁厚的參考值。
The minimum reference value of the wall thickness of GF/ PP products with different content of GF was obtained.
水冷導軌在使用過程中是有磨損的，一般水冷導軌的壁厚是2mm。
There will be attrition during the process of using water-cooled guide, generally the wall thickness of the water-cooled guide is2mm.
以基于泛函通用渦旋型線構成的變壁厚渦旋盤為研究對象，建立了以能效比為目標函數的結構參數優化模型。
A variable wall thickness scroll plate constituted by general scroll profiles based on functional theory was taken as the study object.
愛華網本文地址 » http://www.klfzs.com/a/240461/301554367.html
